• NEWS

How to clean CorTec hvls fan
Time:2023-10-19

1. CorTec hvls fan blade and motor maintenance

Clean and maintain the CorTec hvls fan in time according to the amount of dust and oil in the working environment of the CorTec hvls fan, mainly including dust and oil on the upper part of the CorTec hvls fan blades and oil and dust on the outside of the motor. Regular cleaning and maintenance of external CorTec hvls fans can reduce the failure rate of industrial energy-saving CorTec hvls fans during operation and provide a clean and tidy air environment for personnel working in the CorTec hvls fan environment.

2. Bearing maintenance

Bearings are the main working parts of industrial CorTec hvls fans. If the bearings become clogged during operation, the energy consumption of the CorTec hvls fan will increase. Therefore, during daily use, the bearings of industrial CorTec hvls fans should be wiped regularly and an appropriate amount of lubricating oil should be added to extend the service life of the bearings.

3. Accessories maintenance

The maintenance of industrial CorTec hvls fan accessories is mainly to check the working status and wear status of the accessories in time. If the wear is serious, parts should be replaced in time. Industrial CorTec hvls fan accessories are worn, screws are loose, and accessories are lost. They should be replaced or repaired in time.

Expand your knowledge: How to clean CorTec hvls fans

1. Use special tools for climbing operations to remove the blades and casing of large industrial CorTec hvls fans.

2. Use clean cotton cloth, plastic foam, silk or other soft scrapers to clean the disassembled industrial CorTec hvls fan parts. Do not use scrapers, gauze and other raw materials that can easily damage the production and processing surfaces.

3. After the surface of the part is completely clean, care should be taken to ensure that the part is not affected, especially the production and processing surface should maintain its original accuracy.

4. Cleaned parts of large industrial CorTec hvls fans should not be assembled immediately. They should be coated with grease and covered with clean moisture-proof paper to prevent dust from falling in. They should be opened when reassembling.

5. After cleaning the disassembled CorTec hvls fan, you can deal with the fixed parts on the top of the CorTec hvls fan. Clean the CorTec hvls fan with a clean towel and a slightly alkaline cleaning solution.

6. After all parts are cleaned and dried, reinstall the CorTec hvls fan according to the installation method of l CorTec hvls fan to complete the cleaning.

康尔泰-08.jpg